Backed by rich industry experiences, we are highly engaged in manufacturing and exporting an optimum quality range of
Trim Cutter Machine. This letter is widely used in various industries to crush large lumps without pre cutting. Owing to its less maintenance and robust construction, our offered cutter is highly demanded among our precious clients. In accordance with the set industry standards, the provided cutter is well-manufactured by our highly experienced professionals. Furthermore, our clients can avail this cutter from us at industry leading price.
These machines are ideally suited for:
- Crushing of large lumps without pre cutting
- Crushing of HDPE pipes of diameter 450 mm thickness say. 60 mm & length 2.5 meters without pre cutting
- Bails of thin films, pet bottles etc can be fed directly into the single shaft shredder to granulate into small chips.
- Wood scraps can also be granulated to small chips
- The cutting chamber has rotor with multi cutters bolted onto the rotor. The blades on the rotors are square shape having 4 indexable edges
- The rotor drive system consists of foot mounted motor which drives SMSR (Shaft Mounted Speed Reducer) through pulleys. The SMSR is mounted on rotor shaft. The rotor shaft rotates at about 70 rpm. The SMSRr takes care of impact loading of the rotor cutter by means of rubber bushing suspension system
- The rpm of rotor is approximately 70, obtained by SMSR (Shaft Mounted Speed Reducer) & V belt drive through motor
- The fix blade is fitted into the cutting chamber. The fix blade has multiple V grooves (Angle 90º)
- Thick pipes, lumps or bail of thin films are fed manually or through conveyor into the cutting chamber via sound proof hoper
- The reciprocating ram (with adjustable feed) presses the articles against rotor blades & fix blades, there by granulating the pipes, lumps or articles into small chips
Salient Features:
- The hydraulic cylinder is suspended by cardanic joint (universal joint), which takes care of uneven load on ram & reduces the unnecessary wear on piston seals, rod seals, thereby increases the life of hydraulic cylinder
- The feed of the reciprocating ram can be adjusted by hydraulic valve, as per the load \\& if the load on cutter increases, the ram stops \feeding into the cutter \& reverses into open position
- During cutting operation, if the material is jammed in between the rotary & fix blades, there is a provision to reverse the cutter direction of rotation, there realizing the jammed material
- The bearings are spherical & located outside the chamber so that it can take up mis alignment & the dust generated by shredder does not enter into the bearings
